DIY Birthday Party Pinata #DIYPinata #BirthdayParty #KidsBirthdayPartyIdeas

Tangled Pinata 2

It’s Party time! There are a lot of different piñata’s you can chose from at the stores, but they may not have the theme that your looking for. If you trying to keep a Birthday Party cost down, this is a great way to help keep them down. There are always so many reasons that we want to make our own projects. I wanted to show you how to make your own DIY pinata for any party or event that you have coming up. You could also make one of them for the holidays, and do more of a theme around.

Materials:

* 8 Purple Sheets Of Tissue Paper

* 8 Pink Sheets Of Tissue Paper

* 1 Cardboard Box with the dimensions that you would like, you don’t want the height of the box over 7″ for a birthday party, It’s the perfect height. The width you will want to measure with the object you will be using as the focal point. You do not want a really thick box or a really thin box, other wise the kids won’t be able to break it or it will break right away and crush the candy when hit. A regular cardboard box without double layers will work well. (No shiny sides as the glue doesn’t stick as well)

* Clear Packing Tape

* Elmers Glue

* For the character or theme of the party you can use a Matching Plate that you will use at the party or you can use a helium balloon with the character on it that is not blown up

Steps for making your Pinata:

Step 1: You will want to cut 4 sheets of each colored tissue paper for your pinata. You will unfold the 4 sheets, then take 2 sheets at a time, and cut them 1 1/2 to 2 inch strips. When you have cut all the strips, you will then cut half cuts into the strip to make the strips into the fringe like look for the pinata.

Step 2: You will want to figure out which way you would like your pinata to hang. Then put two holes for your thick twine or yarn to hold the rope that you will use to pull the pinata so that the children can hit it. You will put two holes on each side and string it through and tie it so that it’s strong enough to support the rope. Once you have your twine or yarn in place then use the Packing tape to close the flaps on your box.

Step 3: Cut a slit into the side of the box, you will want to make 2 more slits so that you have a part of the box that will lift up so you can stuff the candy inside. Just like is shown below. You will want to make the slit at the top of your cardboard box.
It will not matter if your going to make a square or triangle pinata. You will still go through the same steps and just put the pinata the way you want it when your finished. You will do the front and back of your pinata first.

box slit 1

Step 4: You will start with any corner that you want in the front of your Pinata. Take one of your strips, hold it up to the box and cut it where it will only over lap the sides a little bit then cut it there. You will add Elmer’s glue to the strip where the slits are not at. Then apply it to your box at the tip of the corner as shown. Then continue to rotate the colors till your 1/4 of the way down as shown.

corner of box for pinata

Step 5: Then move to the next corner and repeat till you have all the corners complete. Don’t worry if you go into the sides of the pinata we will fix those later. You can use your Plate or Balloon as a guide to see how far down you would like to go down for your corners. Once your corners are complete you will go to the open areas between your corners and again fill in the area rotating colors so that you cover all the areas. Leave the area where your Balloon or Plate will go blank for now.

pinata corners amomsparadise

Step 6: When you start on the back of your Pinata, you will start on the top and just keep rotating the colors all the way to the bottom of the pinata. The Longer areas you will need to use a strip and a 1/2 to 2 strips to cover the area using the same colors.

Step 7: You will now work on the sides of your pinata. If you have over lapped your strips on the side. They will be dry now. So you can lift them up a little and cut off the excess so that you can fill in the sides of the pinata and they will lay flat.

Step 8: You will want to start on the side where your slit is for the candy to go in the pinata. Start to rotate your strips on the side away from you. When you are to your slit you will use smaller strips in front of the slit then cut strips that will cover the opening and give it room to move up and down. so before you glue your first one on. Hold it tight onto the opening and make sure it won’t break when your opening and closing your opening. If it does break then use a little longer piece. To save you time use that piece as a template for the rest of your strips so you won’t have to measure each strip. Then glue the strips with rotating colors.

Step 9: You will now finish the other sides of your pinata in the same way that you did the side with the slit. Your pinata is now complete with all your strips.

Step 10: If your using a helium balloon you will cut the balloon to use in the middle of your pinata and just use the top character part of the balloon to add to your pinata. If your using a Plate that matches your theme you won’t need to cut it at all. You will now add glue around the outer edge and center of the object you are using. Then put it into place and smooth it out.

Tangled Pinata 2

Step 11: This is the last step for completing your pinata. If you have space around your balloon or plate that is showing your cardboard box then rotate strips to fill them in. Once this step is complete, you will want to take strips to cover the edges of your plate or balloon. Take your strip and measure around the outer edge. You can use smaller strips if it’s easier for you, and then go all the way around the outer edge. You will want to use the light color as the first layer around the edge and then cover the light color with a darker color so that the glue won’t show. Your pinata is now complete, it’s ready for your party! Just fill with candy once it is completely dry, use the packing tape to close the slit and your ready for the kids to have a great time with their pinata!

It's only fair to share...Share on FacebookTweet about this on TwitterPin on PinterestShare on StumbleUponShare on Google+Email this to someonePrint this pageBuffer this pageDigg thisFlattr the authorShare on LinkedInShare on RedditShare on TumblrShare on Yummly
Tagged , , . Bookmark the permalink.

15 Responses to DIY Birthday Party Pinata #DIYPinata #BirthdayParty #KidsBirthdayPartyIdeas

  1. kelly tupick says:

    This looks really neat and sounds so easy to make. I have never attempted one but i think i’m going try.

    • A Mom's Paradise says:

      It does take some time so I suggest doing it ahead of time, then you can focus on the rest of the party needs. It is easy to make and looks way better then store bought pinata’s

  2. Dorothy Boucher says:

    oh how nice 😉 such a crafty idea, will have to do one with my grandchilren.. will be fun

  3. tanya holland says:

    This is such a cute idea. My two girls keep asking about these and I never thought of making one.

  4. Mariah Applegate says:

    This would be sooo cute to do with a Frozen themed party! Either Elsa or Olaf would be an awesome piñata!

    • A Mom's Paradise says:

      I have made them with the frozen characters as well and they come out so adorable! You can really do this pinata in any colors to match your theme and any characters that your child loves.

  5. I am making this for my son’s birthday. Thank you!

  6. Tricia Hope says:

    I have done pinatas for my kids but gave up because of the hassle.Will make this for my grand daughter for sure!

    • A Mom's Paradise says:

      It’s so much easier and they come out so cute and have more decorations then the store bought. She will love it!

  7. Tina F says:

    Hey this is so easy ALL the money I have spent on Pinatas when I could be making it myself Thank you

  8. Jennifer Hiles says:

    What a cute idea! I think I actually have all the things I need to make this. I may need to pick up some extra tissue paper but that costs nothing compared to the price of buying a pinata. Great money saver and super cute!

    • A Mom's Paradise says:

      They come out so much better then the store bought as well. They have more designs and you can add as many colors as you would like so that it matches your theme. So glad you like the idea.

  9. Kamla L. says:

    Love your Frozen pinata. I’ve never tried making one before. You’ve made it look so easy that I’m going to brave making one myself and see how it turns out. I can see how versatile the technique would be for a variety of themes. Thanks!

Leave a Reply

Your email address will not be published. Required fields are marked *